A new internal drive normally ships unformatted. Unless the operating system on the old boot drive posts a dialog box offering to format the unrecognized drive, the computer doesn't 'detect' anything because there isn't anything the operating system can speak to yet. Of course, if the way you installed this SSD was to remove the previous internal HD and install the SSD in its place, without formatting the new SSD and installing a bootable operating system first, then there's no operating system or formatting utility at all. What steps have you already taken? If you can give us a detailed list of the things you've already done, in order, it will be easier to determine where the problem is. A common technique to replace an internal boot HD with an SSD would be to: • attach the SSD as an external drive first through USB/FireWire/ Thunderbolt • use Disk Utility to format the SSD • clone the operating system+user data from the internal HD to the external SSD using Disk Utility, SuperDuper! Or Carbon Copy Cloner (you can also do a clean operating system install by downloading an installer from the App Store and installing it on the new drive) • then open up the computer and swap the drives That way, once you restart the reassembled computer, you can at least be sure that there's a drive with a bootable operating system available.
If you're following the technique I've outlined, it's wise to try booting from the new external SSD before installing it internally, just to make sure the computer recognizes the drive as bootable. That's correct. You start the computer-as-external hard drive while holding down the T key as you power up. If it works, you should see a FireWire icon bopping around on the target machine's display. I assume the same technique works with Thunderbolt, but I've never had the opportunity to try it. I've also never tried to mount a computer with an unformatted drive as a target drive, but I don't see why this shouldn't work. I hope you'll report back and let us know if this works.In future, an external or interface is a handy thing to have around.
If a new, unformatted SSD isn't recognized at all, then either the drive has failed or it isn't installed correctly. If the drive is dead, yell at the manufacturer/retailer for a replacement. If it's a connection problem, try: Disconnecting/reconnecting the SSD, swapping out the SATA and power cables, try a different USB/FireWire/Thunderbolt cable, try a different external housing (or try an external housing for an internal mounted drive).
Connect the bootable installer to a compatible Mac. Use Startup Manager or Startup Disk preferences to select the bootable installer as the startup disk, then start up from it. Mac ios on pc. Your Mac will start up to macOS Recovery. Learn about selecting a startup disk, including what to do if your Mac doesn't start up from it. Choose your language, if prompted.
If the drive is unformatted, it won't appear in the finder; you have to format it before there's anything visible. If drive appears in Disk Utility or another formatting tool, it will show up only as the drive mechanism - the finder volume will only appear after you've formatted it using the partition tool.
Popular Posts
A new internal drive normally ships unformatted. Unless the operating system on the old boot drive posts a dialog box offering to format the unrecognized drive, the computer doesn\'t \'detect\' anything because there isn\'t anything the operating system can speak to yet. Of course, if the way you installed this SSD was to remove the previous internal HD and install the SSD in its place, without formatting the new SSD and installing a bootable operating system first, then there\'s no operating system or formatting utility at all. What steps have you already taken? If you can give us a detailed list of the things you\'ve already done, in order, it will be easier to determine where the problem is. A common technique to replace an internal boot HD with an SSD would be to: • attach the SSD as an external drive first through USB/FireWire/ Thunderbolt • use Disk Utility to format the SSD • clone the operating system+user data from the internal HD to the external SSD using Disk Utility, SuperDuper! Or Carbon Copy Cloner (you can also do a clean operating system install by downloading an installer from the App Store and installing it on the new drive) • then open up the computer and swap the drives That way, once you restart the reassembled computer, you can at least be sure that there\'s a drive with a bootable operating system available.
If you\'re following the technique I\'ve outlined, it\'s wise to try booting from the new external SSD before installing it internally, just to make sure the computer recognizes the drive as bootable. That\'s correct. You start the computer-as-external hard drive while holding down the T key as you power up. If it works, you should see a FireWire icon bopping around on the target machine\'s display. I assume the same technique works with Thunderbolt, but I\'ve never had the opportunity to try it. I\'ve also never tried to mount a computer with an unformatted drive as a target drive, but I don\'t see why this shouldn\'t work. I hope you\'ll report back and let us know if this works.In future, an external or interface is a handy thing to have around.
If a new, unformatted SSD isn\'t recognized at all, then either the drive has failed or it isn\'t installed correctly. If the drive is dead, yell at the manufacturer/retailer for a replacement. If it\'s a connection problem, try: Disconnecting/reconnecting the SSD, swapping out the SATA and power cables, try a different USB/FireWire/Thunderbolt cable, try a different external housing (or try an external housing for an internal mounted drive).
Connect the bootable installer to a compatible Mac. Use Startup Manager or Startup Disk preferences to select the bootable installer as the startup disk, then start up from it. Mac ios on pc. Your Mac will start up to macOS Recovery. Learn about selecting a startup disk, including what to do if your Mac doesn\'t start up from it. Choose your language, if prompted.
If the drive is unformatted, it won\'t appear in the finder; you have to format it before there\'s anything visible. If drive appears in Disk Utility or another formatting tool, it will show up only as the drive mechanism - the finder volume will only appear after you\'ve formatted it using the partition tool.
...'>Make Bootable Usb Utility For Jet Drive For Mac On My Windows Pc(07.01.2019)A new internal drive normally ships unformatted. Unless the operating system on the old boot drive posts a dialog box offering to format the unrecognized drive, the computer doesn\'t \'detect\' anything because there isn\'t anything the operating system can speak to yet. Of course, if the way you installed this SSD was to remove the previous internal HD and install the SSD in its place, without formatting the new SSD and installing a bootable operating system first, then there\'s no operating system or formatting utility at all. What steps have you already taken? If you can give us a detailed list of the things you\'ve already done, in order, it will be easier to determine where the problem is. A common technique to replace an internal boot HD with an SSD would be to: • attach the SSD as an external drive first through USB/FireWire/ Thunderbolt • use Disk Utility to format the SSD • clone the operating system+user data from the internal HD to the external SSD using Disk Utility, SuperDuper! Or Carbon Copy Cloner (you can also do a clean operating system install by downloading an installer from the App Store and installing it on the new drive) • then open up the computer and swap the drives That way, once you restart the reassembled computer, you can at least be sure that there\'s a drive with a bootable operating system available.
If you\'re following the technique I\'ve outlined, it\'s wise to try booting from the new external SSD before installing it internally, just to make sure the computer recognizes the drive as bootable. That\'s correct. You start the computer-as-external hard drive while holding down the T key as you power up. If it works, you should see a FireWire icon bopping around on the target machine\'s display. I assume the same technique works with Thunderbolt, but I\'ve never had the opportunity to try it. I\'ve also never tried to mount a computer with an unformatted drive as a target drive, but I don\'t see why this shouldn\'t work. I hope you\'ll report back and let us know if this works.In future, an external or interface is a handy thing to have around.
If a new, unformatted SSD isn\'t recognized at all, then either the drive has failed or it isn\'t installed correctly. If the drive is dead, yell at the manufacturer/retailer for a replacement. If it\'s a connection problem, try: Disconnecting/reconnecting the SSD, swapping out the SATA and power cables, try a different USB/FireWire/Thunderbolt cable, try a different external housing (or try an external housing for an internal mounted drive).
Connect the bootable installer to a compatible Mac. Use Startup Manager or Startup Disk preferences to select the bootable installer as the startup disk, then start up from it. Mac ios on pc. Your Mac will start up to macOS Recovery. Learn about selecting a startup disk, including what to do if your Mac doesn\'t start up from it. Choose your language, if prompted.
If the drive is unformatted, it won\'t appear in the finder; you have to format it before there\'s anything visible. If drive appears in Disk Utility or another formatting tool, it will show up only as the drive mechanism - the finder volume will only appear after you\'ve formatted it using the partition tool.
...'>Make Bootable Usb Utility For Jet Drive For Mac On My Windows Pc(07.01.2019)